Quantum Field Theory and Einsteins General Theory
Page 1 of 1
Quantum Field Theory and Einsteins General Theory
Since I know you love reading my posts from Europe are wherever you are
![sulkof10](/users/3312/31/47/39/smiles/3237409829.gif)
![Quantum Field Theory and Einsteins General Theory Gravit10](https://i.servimg.com/u/f80/19/36/49/57/gravit10.jpg)
When speaking of our universe, it's often said that "matter tells spacetime how to curve, and curved spacetime tells matter how to move." This is the essence of Albert Einstein's famous general theory of relativity, and describes how planets, stars, and galaxies move and influence the space around them. While general relativity captures much of the big in our universe, it's at odds with the small in physics as described by quantum mechanics.
For his Ph.D. research, Sjors Heefer has explored gravity in our universe, with his research having implications for the exciting field of gravitational waves, and perhaps influencing how the big and small of physics can be reconciled in the future.
A little over a hundred years ago, Albert Einstein revolutionized our understanding of gravity with his general theory of relativity.
"According to Einstein's theory, gravity is not a force but emerges due to the geometry of the four-dimensional spacetime continuum, or spacetime for short," says Heefer. "And it's central to the emergence of fascinating phenomena in our universe such as gravitational waves."
Massive objects, such as the sun or galaxies, warp spacetime around them, and other objects then move along the straightest possible paths—otherwise known as geodesics—through this curved spacetime.
Due to the curvature, however, these geodesics are not straight in the usual sense at all. In the case of the planets in the solar system, for instance, they describe elliptical orbits around the sun. In this way, general relativity elegantly explains the movement of the planets as well as numerous other gravitational phenomena, ranging from everyday situations to black holes and the Big Bang. As such, it remains a cornerstone of modern physics.
Clash of the theories
While general relativity describes a host of astrophysical phenomena, it clashes with another fundamental theory of physics—quantum mechanics.
"Quantum mechanics suggests that particles (like electrons or muons) exist in multiple states at the same time until they are measured or observed," says Heefer. "Once measured, they randomly select a state due to a mysterious effect referred to as the 'collapse of the wave function.'"
In quantum mechanics, a wave function is a mathematical expression that describes the position and state of a particle, such as an electron. And the square of the wave function leads to a collection of probabilities of where the particle might be located. The larger the square of the wave function at a particular location, the higher the probability that a particle will be located at that location once it is observed.
"All matter in our universe appears to be subject to the strange probabilistic laws of quantum mechanics," Heefer notes. "And the same is true for all forces of nature—except for gravity. This discrepancy leads to deep philosophical and mathematical paradoxes, and resolving these is one of the primary challenges in fundamental physics today."
Is expansion the solution?
One approach to resolving the clash of general relativity and quantum mechanics is to expand the mathematical framework behind general relativity.
In terms of mathematics, general relativity is based on pseudo-Riemannian geometry, which is a mathematical language capable of describing most of the typical shapes that spacetime can take.
"Recent discoveries indicate, however, that our universe's spacetime might be outside the scope of pseudo-Riemannian geometry and can only be described by Finsler geometry, a more advanced mathematical language," says Heefer.
Field equations
To explore the possibilities of Finsler gravity, Heefer needed to analyze and solve a certain field equation.
Physicists like to describe everything in nature in terms of fields. In physics, a field is simply something that has a value at each point in space and time.
A simple example would be temperature, for instance; at any given point in time, each point in space has a certain temperature associated with it.
A slightly more complex example is that of the electromagnetic field. At any given point in time, the value of the electromagnetic field at a certain point in space tells us the direction and magnitude of the electromagnetic force that a charged particle, like an electron, would experience if it were located at that point.
When it comes to the geometry of spacetime itself, that is also described by a field, namely the gravitational field. The value of this field at a point in spacetime tells us the curvature of spacetime at that point, and it is this curvature that manifests itself as gravity.
Heefer turned to the Christian Pfeifer and Mattias N. R. Wohlfarth's vacuum field equation, which is the equation that governs this gravitational field in empty space. In other words, this equation describes the possible shapes that the geometry of spacetime could take in the absence of matter.
Heefer explains, "To good approximation, this includes all interstellar space between stars and galaxies, as well as the empty space surrounding objects such as the sun and the Earth. By carefully analyzing the field equation, several new types of spacetime geometries have been identified."
Gravitational waves confirmation
One particularly exciting discovery from Heefer's work involves a class of spacetime geometries that represent gravitational waves—ripples in the fabric of spacetime that propagate at the speed of light and can be caused by the collision of neutron stars or black holes, for example.
The first direct detection of gravitational waves on September 14, 2015, marked the dawn of a new era in astronomy, allowing scientists to explore the universe in an entirely new way.
Since then, many observations of gravitational waves have been made. Heefer's research indicates that these are all consistent with the hypothesis that our spacetime has a Finslerian nature.
Scratching the surface
While Heefer's results are promising, they only scratch the surface of the implications of the field equation of Finsler gravity.
"The field is still young and further research in this direction is actively ongoing," says Heefer. "I'm optimistic that our results will prove instrumental in deepening our understanding of gravity and I hope that, eventually, they may even shine light on the reconciliation of gravity with quantum mechanics."
![lol](/users/3312/31/47/39/smiles/biggrin.gif)
![sulkof10](/users/3312/31/47/39/smiles/3237409829.gif)
![Quantum Field Theory and Einsteins General Theory Gravit10](https://i.servimg.com/u/f80/19/36/49/57/gravit10.jpg)
When speaking of our universe, it's often said that "matter tells spacetime how to curve, and curved spacetime tells matter how to move." This is the essence of Albert Einstein's famous general theory of relativity, and describes how planets, stars, and galaxies move and influence the space around them. While general relativity captures much of the big in our universe, it's at odds with the small in physics as described by quantum mechanics.
For his Ph.D. research, Sjors Heefer has explored gravity in our universe, with his research having implications for the exciting field of gravitational waves, and perhaps influencing how the big and small of physics can be reconciled in the future.
A little over a hundred years ago, Albert Einstein revolutionized our understanding of gravity with his general theory of relativity.
"According to Einstein's theory, gravity is not a force but emerges due to the geometry of the four-dimensional spacetime continuum, or spacetime for short," says Heefer. "And it's central to the emergence of fascinating phenomena in our universe such as gravitational waves."
Massive objects, such as the sun or galaxies, warp spacetime around them, and other objects then move along the straightest possible paths—otherwise known as geodesics—through this curved spacetime.
Due to the curvature, however, these geodesics are not straight in the usual sense at all. In the case of the planets in the solar system, for instance, they describe elliptical orbits around the sun. In this way, general relativity elegantly explains the movement of the planets as well as numerous other gravitational phenomena, ranging from everyday situations to black holes and the Big Bang. As such, it remains a cornerstone of modern physics.
Clash of the theories
While general relativity describes a host of astrophysical phenomena, it clashes with another fundamental theory of physics—quantum mechanics.
"Quantum mechanics suggests that particles (like electrons or muons) exist in multiple states at the same time until they are measured or observed," says Heefer. "Once measured, they randomly select a state due to a mysterious effect referred to as the 'collapse of the wave function.'"
In quantum mechanics, a wave function is a mathematical expression that describes the position and state of a particle, such as an electron. And the square of the wave function leads to a collection of probabilities of where the particle might be located. The larger the square of the wave function at a particular location, the higher the probability that a particle will be located at that location once it is observed.
"All matter in our universe appears to be subject to the strange probabilistic laws of quantum mechanics," Heefer notes. "And the same is true for all forces of nature—except for gravity. This discrepancy leads to deep philosophical and mathematical paradoxes, and resolving these is one of the primary challenges in fundamental physics today."
Is expansion the solution?
One approach to resolving the clash of general relativity and quantum mechanics is to expand the mathematical framework behind general relativity.
In terms of mathematics, general relativity is based on pseudo-Riemannian geometry, which is a mathematical language capable of describing most of the typical shapes that spacetime can take.
"Recent discoveries indicate, however, that our universe's spacetime might be outside the scope of pseudo-Riemannian geometry and can only be described by Finsler geometry, a more advanced mathematical language," says Heefer.
Field equations
To explore the possibilities of Finsler gravity, Heefer needed to analyze and solve a certain field equation.
Physicists like to describe everything in nature in terms of fields. In physics, a field is simply something that has a value at each point in space and time.
A simple example would be temperature, for instance; at any given point in time, each point in space has a certain temperature associated with it.
A slightly more complex example is that of the electromagnetic field. At any given point in time, the value of the electromagnetic field at a certain point in space tells us the direction and magnitude of the electromagnetic force that a charged particle, like an electron, would experience if it were located at that point.
When it comes to the geometry of spacetime itself, that is also described by a field, namely the gravitational field. The value of this field at a point in spacetime tells us the curvature of spacetime at that point, and it is this curvature that manifests itself as gravity.
Heefer turned to the Christian Pfeifer and Mattias N. R. Wohlfarth's vacuum field equation, which is the equation that governs this gravitational field in empty space. In other words, this equation describes the possible shapes that the geometry of spacetime could take in the absence of matter.
Heefer explains, "To good approximation, this includes all interstellar space between stars and galaxies, as well as the empty space surrounding objects such as the sun and the Earth. By carefully analyzing the field equation, several new types of spacetime geometries have been identified."
Gravitational waves confirmation
One particularly exciting discovery from Heefer's work involves a class of spacetime geometries that represent gravitational waves—ripples in the fabric of spacetime that propagate at the speed of light and can be caused by the collision of neutron stars or black holes, for example.
The first direct detection of gravitational waves on September 14, 2015, marked the dawn of a new era in astronomy, allowing scientists to explore the universe in an entirely new way.
Since then, many observations of gravitational waves have been made. Heefer's research indicates that these are all consistent with the hypothesis that our spacetime has a Finslerian nature.
Scratching the surface
While Heefer's results are promising, they only scratch the surface of the implications of the field equation of Finsler gravity.
"The field is still young and further research in this direction is actively ongoing," says Heefer. "I'm optimistic that our results will prove instrumental in deepening our understanding of gravity and I hope that, eventually, they may even shine light on the reconciliation of gravity with quantum mechanics."
Bookie Challenge
Original Rookie of the Year
BC CHAMPION 2018
BC CHAMPION 2019
BC CHAMPION 2024
Many time Rudy Award Winner
Bookie Challenge Hall of Fame
https://tinyurl.com/OfficialBookieChallenge
Re: Quantum Field Theory and Einsteins General Theory
POWHEG-BOX at Theory for Higgs
LHC@home
LHC@home
Project
Computing
Community
Jobs
Site
Magic Quantum Mechanic
Log out
Name Theory_2773-2944255-52_0
Workunit 223595192
Created 13 Jun 2024, 6:41:53 UTC
Sent 13 Jun 2024, 23:00:33 UTC
Report deadline 24 Jun 2024, 23:00:33 UTC
Received 15 Jun 2024, 8:49:18 UTC
Server state Over
Outcome Success
Client state Done
Exit status 0 (0x00000000)
Computer ID 10451775
Run time 1 days 9 hours 18 min 12 sec
CPU time 1 days 3 hours 29 min 1 sec
Validate state Valid
Credit 1,151.54
Device peak FLOPS 4.15 GFLOPS
Application version Theory Simulation v300.30 (vbox64_theory)
windows_x86_64
Peak working set size 81.87 MB
Peak swap size 103.18 MB
Peak disk usage 2.04 GB
Stderr output
7.24.1
2024-06-13 16:30:49 (8328): vboxwrapper version 26207
2024-06-13 16:30:49 (8328): BOINC client version: 7.24.1
2024-06-13 16:30:50 (8328): Detected: VirtualBox VboxManage Interface (Version: 6.1.50)
2024-06-13 16:30:50 (8328): Detected: Heartbeat check (file: 'heartbeat' every 1200.000000 seconds)
2024-06-13 16:30:50 (8328): Successfully copied 'init_data.xml' to the shared directory.
2024-06-13 16:30:50 (8328): Successfully copied 'input' to the shared directory.
2024-06-13 16:30:50 (8328): Create VM. (boinc_9e705b373655c0e3, slot#4)
2024-06-13 16:30:51 (8328): Setting Memory Size for VM. (630MB)
2024-06-13 16:30:51 (8328): Setting CPU Count for VM. (1)
2024-06-13 16:30:51 (8328): Setting Chipset Options for VM.
2024-06-13 16:30:52 (8328): Setting Graphics Controller Options for VM.
2024-06-13 16:30:52 (8328): Setting Boot Options for VM.
2024-06-13 16:30:52 (8328): Setting Network Configuration for NAT.
2024-06-13 16:30:52 (8328): Enabling VM Network Access.
2024-06-13 16:30:53 (8328): Disabling USB Support for VM.
2024-06-13 16:30:53 (8328): Disabling COM Port Support for VM.
2024-06-13 16:30:53 (8328): Disabling LPT Port Support for VM.
2024-06-13 16:30:53 (8328): Disabling Audio Support for VM.
2024-06-13 16:30:54 (8328): Disabling Clipboard Support for VM.
2024-06-13 16:30:54 (8328): Disabling Drag and Drop Support for VM.
2024-06-13 16:30:54 (8328): Adding storage controller(s) to VM.
2024-06-13 16:30:54 (8328): Adding virtual disk drive to VM. (Theory_2024_04_30_prod.vdi)
2024-06-13 16:30:55 (8328): Adding VirtualBox Guest Additions to VM.
2024-06-13 16:30:55 (8328): Adding network bandwidth throttle group to VM. (Defaulting to 1024GB)
2024-06-13 16:30:55 (8328): forwarding host port 51981 to guest port 80
2024-06-13 16:30:56 (8328): Enabling remote desktop for VM.
2024-06-13 16:30:56 (8328): Enabling shared directory for VM.
2024-06-13 16:30:57 (8328): Starting VM using VBoxManage interface. (boinc_9e705b373655c0e3, slot#4)
2024-06-13 16:31:03 (8328): Successfully started VM. (PID = '1992')
2024-06-13 16:31:03 (8328): Reporting VM Process ID to BOINC.
2024-06-13 16:31:03 (8328): Guest Log: BIOS: VirtualBox 6.1.50
2024-06-13 16:31:03 (8328): Guest Log: CPUID EDX: 0x178bfbff
2024-06-13 16:31:03 (8328): Guest Log: BIOS: No PCI IDE controller, not probing IDE
2024-06-13 16:31:03 (8328): Guest Log: BIOS: AHCI 0-P#0: PCHS=16383/16/63 LCHS=1024/255/63 0x0000000002800000 sectors
2024-06-13 16:31:03 (8328): VM state change detected. (old = 'poweredoff', new = 'running')
2024-06-13 16:31:03 (8328): Detected: Web Application Enabled (http://localhost:51981)
2024-06-13 16:31:03 (8328): Detected: Remote Desktop Enabled (localhost:51982)
2024-06-13 16:31:03 (8328): Preference change detected
2024-06-13 16:31:03 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 16:31:03 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 16:31:05 (8328): Guest Log: BIOS: Boot : bseqnr=1, bootseq=0032
2024-06-13 16:31:05 (8328): Guest Log: BIOS: Booting from Hard Disk...
2024-06-13 16:31:08 (8328): Guest Log: BIOS: KBD: unsupported int 16h function 03
2024-06-13 16:31:08 (8328): Guest Log: BIOS: AX=0305 BX=0000 CX=0000 DX=0000
2024-06-13 16:31:41 (8328): Guest Log: vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
2024-06-13 16:31:41 (8328): Guest Log: vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
2024-06-13 16:31:44 (8328): Guest Log: VBoxService 5.2.6 r120293 (verbosity: 0) linux.amd64 (Jan 15 2018 14:51:00) release log
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000134 main Log opened 2024-06-13T23:31:45.146476000Z
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000250 main OS Product: Linux
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000308 main OS Release: 4.14.76-13.cernvm.x86_64
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000346 main OS Version: #1 SMP Tue Oct 16 18:26:15 CEST 2018
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000400 main Executable: /usr/sbin/VBoxService
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000402 main Process ID: 3224
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000403 main Package type: LINUX_64BITS_GENERIC
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.003897 main 5.2.6 r120293 started. Verbose level = 0
2024-06-13 16:32:25 (8328): Guest Log: 01:32:25 CEST +02:00 2024-06-14: cranky: [INFO] Detected Theory App
2024-06-13 16:32:25 (8328): Guest Log: 01:32:25 CEST +02:00 2024-06-14: cranky: [INFO] Checking CVMFS.
2024-06-13 16:32:26 (8328): Guest Log: Probing /cvmfs/sft.cern.ch... OK
2024-06-13 16:32:27 (8328): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE
2024-06-13 16:32:27 (8328): Guest Log: 2.5.2.0 4107 0 25720 29590 3 1 272105 4096000 0 65024 0 0 n/a 5 0 http://s1cern-cvmfs.openhtc.io/cvmfs/sft.cern.ch DIRECT 1
2024-06-13 16:32:28 (8328): Guest Log: Probing /cvmfs/grid.cern.ch... OK
2024-06-13 16:32:30 (8328): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE
2024-06-13 16:32:30 (8328): Guest Log: 2.5.2.0 4072 0 27432 24463 3 2 272105 4096000 0 65024 0 2 -100 7962 719 http://s1unl-cvmfs.openhtc.io/cvmfs/grid.cern.ch DIRECT 1
2024-06-13 16:32:31 (8328): Guest Log: Probing /cvmfs/cernvm-prod.cern.ch... OK
2024-06-13 16:32:32 (8328): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE
2024-06-13 16:32:32 (8328): Guest Log: 2.5.2.0 4101 0 25180 272 3 1 272105 4096000 0 65024 0 0 n/a 4 0 http://s1ral-cvmfs.openhtc.io/cvmfs/cernvm-prod.cern.ch DIRECT 1
2024-06-13 16:32:33 (8328): Guest Log: Probing /cvmfs/alice.cern.ch... OK
2024-06-13 16:32:35 (8328): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE
2024-06-13 16:32:35 (8328): Guest Log: 2.5.2.0 4110 0 37572 18890 3 1 272105 4096000 0 65024 0 0 n/a 5424 709 http://s1fnal-cvmfs.openhtc.io/cvmfs/alice.cern.ch DIRECT 1
2024-06-13 16:32:35 (8328): Guest Log: 01:32:35 CEST +02:00 2024-06-14: cranky: [INFO] Checking runc.
2024-06-13 16:32:35 (8328): Guest Log: 01:32:35 CEST +02:00 2024-06-14: cranky: [INFO] Creating the filesystem.
2024-06-13 16:32:35 (8328): Guest Log: 01:32:35 CEST +02:00 2024-06-14: cranky: [INFO] Using /cvmfs/cernvm-prod.cern.ch/cvm4
2024-06-13 16:32:35 (8328): Guest Log: 01:32:36 CEST +02:00 2024-06-14: cranky: [INFO] Updating config.json.
2024-06-13 16:32:35 (8328): Guest Log: 01:32:36 CEST +02:00 2024-06-14: cranky: [INFO] Running Container 'runc'.
2024-06-13 16:33:23 (8328): Guest Log: job: htmld=/shared/html/job
2024-06-13 16:33:29 (8328): Guest Log: job: unpack exitcode=0
2024-06-13 16:33:32 (8328): Guest Log: INFO: activated the work-around for ld:
2024-06-13 16:33:34 (8328): Guest Log: lrwxrwxrwx 1 0 0 15 Jun 13 23:33 /tmp/tmp.1GoZw6rxZj/ld -> /usr/bin/ld.bfd
2024-06-13 16:33:36 (8328): Guest Log: 01:33:36 CEST +02:00 2024-06-14: cranky: [INFO] ===> [runRivet] Thu Jun 13 23:33:35 UTC 2024 [boinc pp jets 13000 440 - powheg-box r3744 pthard2 100000 52]
2024-06-13 16:38:15 (8328): Preference change detected
2024-06-13 16:38:15 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 16:38:15 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 16:46:29 (8328): Preference change detected
2024-06-13 16:46:29 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 16:46:29 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 17:15:45 (8328): Preference change detected
2024-06-13 17:15:45 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 17:15:45 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 17:44:01 (8328): Preference change detected
2024-06-13 17:44:01 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 17:44:02 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 18:11:08 (8328): Status Report: Job Duration: '864000.000000'
2024-06-13 18:11:08 (8328): Status Report: Elapsed Time: '6000.000000'
2024-06-13 18:11:08 (8328): Status Report: CPU Time: '269.218750'
2024-06-13 18:36:19 (8328): Preference change detected
2024-06-13 18:36:19 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 18:36:19 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 19:51:12 (8328): Status Report: Job Duration: '864000.000000'
2024-06-13 19:51:12 (8328): Status Report: Elapsed Time: '12000.000000'
2024-06-13 19:51:12 (8328): Status Report: CPU Time: '390.312500'
2024-06-13 19:58:19 (8328): Preference change detected
2024-06-13 19:58:19 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 19:58:20 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 19:58:31 (8328): Preference change detected
2024-06-13 19:58:31 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 19:58:32 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 20:07:46 (8328): Preference change detected
2024-06-13 20:07:46 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 20:07:46 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 20:25:02 (8328): Preference change detected
2024-06-13 20:25:02 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 20:25:02 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 21:11:20 (8328): Preference change detected
2024-06-13 21:11:20 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 21:11:20 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 21:31:17 (8328): Status Report: Job Duration: '864000.000000'
2024-06-13 21:31:17 (8328): Status Report: Elapsed Time: '18000.000000'
2024-06-13 21:31:17 (8328): Status Report: CPU Time: '503.312500'
2024-06-13 21:57:38 (8328): Preference change detected
2024-06-13 21:57:38 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 21:57:38 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 23:11:22 (8328): Status Report: Job Duration: '864000.000000'
2024-06-13 23:11:22 (8328): Status Report: Elapsed Time: '24000.000000'
2024-06-13 23:11:22 (8328): Status Report: CPU Time: '3319.968750'
2024-06-13 23:50:22 (8328): Preference change detected
2024-06-13 23:50:22 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 23:50:23 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 23:50:34 (8328): Preference change detected
2024-06-13 23:50:34 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 23:50:35 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 00:00:39 (8328): Preference change detected
2024-06-14 00:00:39 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 00:00:39 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 00:12:44 (8328): Preference change detected
2024-06-14 00:12:44 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 00:12:44 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 00:43:50 (8328): Preference change detected
2024-06-14 00:43:50 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 00:43:50 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 00:51:29 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 00:51:29 (8328): Status Report: Elapsed Time: '30000.000000'
2024-06-14 00:51:29 (8328): Status Report: CPU Time: '9324.062500'
2024-06-14 01:04:26 (8328): Preference change detected
2024-06-14 01:04:26 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 01:04:26 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 02:31:34 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 02:31:34 (8328): Status Report: Elapsed Time: '36000.000000'
2024-06-14 02:31:34 (8328): Status Report: CPU Time: '15326.765625'
2024-06-14 04:11:41 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 04:11:41 (8328): Status Report: Elapsed Time: '42000.121483'
2024-06-14 04:11:41 (8328): Status Report: CPU Time: '21332.218750'
2024-06-14 05:51:46 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 05:51:46 (8328): Status Report: Elapsed Time: '48000.121483'
2024-06-14 05:51:46 (8328): Status Report: CPU Time: '27334.906250'
2024-06-14 06:04:34 (8328): Preference change detected
2024-06-14 06:04:34 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 06:04:35 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 07:31:50 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 07:31:50 (8328): Status Report: Elapsed Time: '54000.121483'
2024-06-14 07:31:50 (8328): Status Report: CPU Time: '33337.937500'
2024-06-14 09:11:55 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 09:11:55 (8328): Status Report: Elapsed Time: '60000.121483'
2024-06-14 09:11:55 (8328): Status Report: CPU Time: '39341.406250'
2024-06-14 10:51:59 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 10:51:59 (8328): Status Report: Elapsed Time: '66000.121483'
2024-06-14 10:51:59 (8328): Status Report: CPU Time: '45344.515625'
2024-06-14 11:04:44 (8328): Preference change detected
2024-06-14 11:04:44 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 11:04:44 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 12:32:04 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 12:32:04 (8328): Status Report: Elapsed Time: '72000.121483'
2024-06-14 12:32:04 (8328): Status Report: CPU Time: '51347.265625'
2024-06-14 14:12:08 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 14:12:08 (8328): Status Report: Elapsed Time: '78000.121483'
2024-06-14 14:12:08 (8328): Status Report: CPU Time: '57350.000000'
2024-06-14 15:52:13 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 15:52:13 (8328): Status Report: Elapsed Time: '84000.121483'
2024-06-14 15:52:13 (8328): Status Report: CPU Time: '63353.093750'
2024-06-14 16:04:52 (8328): Preference change detected
2024-06-14 16:04:52 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 16:04:53 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 17:32:17 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 17:32:17 (8328): Status Report: Elapsed Time: '90000.121483'
2024-06-14 17:32:17 (8328): Status Report: CPU Time: '69356.078125'
2024-06-14 19:12:22 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 19:12:22 (8328): Status Report: Elapsed Time: '96000.121483'
2024-06-14 19:12:22 (8328): Status Report: CPU Time: '75359.203125'
2024-06-14 20:52:27 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 20:52:27 (8328): Status Report: Elapsed Time: '102000.121483'
2024-06-14 20:52:27 (8328): Status Report: CPU Time: '81195.531250'
2024-06-14 21:05:02 (8328): Preference change detected
2024-06-14 21:05:02 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 21:05:03 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 21:16:34 (8328): Preference change detected
2024-06-14 21:16:34 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 21:16:34 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 22:30:20 (8328): Preference change detected
2024-06-14 22:30:20 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 22:30:20 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 22:32:31 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 22:32:31 (8328): Status Report: Elapsed Time: '108000.121483'
2024-06-14 22:32:31 (8328): Status Report: CPU Time: '87199.171875'
2024-06-14 23:18:23 (8328): Preference change detected
2024-06-14 23:18:23 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 23:18:23 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-15 00:00:41 (8328): Preference change detected
2024-06-15 00:00:41 (8328): Setting CPU throttle for VM. (100%)
2024-06-15 00:00:41 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-15 00:12:35 (8328): Status Report: Job Duration: '864000.000000'
2024-06-15 00:12:35 (8328): Status Report: Elapsed Time: '114000.121483'
2024-06-15 00:12:35 (8328): Status Report: CPU Time: '93201.796875'
2024-06-15 00:13:23 (8328): Preference change detected
2024-06-15 00:13:23 (8328): Setting CPU throttle for VM. (100%)
2024-06-15 00:13:24 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-15 01:48:49 (8328): Guest Log: job: run exitcode=0
2024-06-15 01:48:49 (8328): Guest Log: job: diskusage=103600
2024-06-15 01:48:49 (8328): Guest Log: job: logsize=104 k
2024-06-15 01:48:49 (8328): Guest Log: job: times=
2024-06-15 01:48:49 (8328): Guest Log: 0m0.050s 0m0.050s
2024-06-15 01:48:49 (8328): Guest Log: 1617m8.836s 10m37.715s
2024-06-15 01:48:49 (8328): Guest Log: job: cpuusage=97667
2024-06-15 01:48:53 (8328): Guest Log: 10:48:50 CEST +02:00 2024-06-15: cranky: [INFO] Container 'runc' finished with status code 0.
2024-06-15 01:48:53 (8328): Guest Log: 10:48:51 CEST +02:00 2024-06-15: cranky: [INFO] Preparing output.
2024-06-15 01:48:54 (8328): Guest Log: [INFO] Job Finished
2024-06-15 01:48:54 (8328): Guest Log: [INFO] Shutting Down.
2024-06-15 01:48:54 (8328): VM Completion File Detected.
2024-06-15 01:48:54 (8328): VM Completion Message: Job Finished
.
2024-06-15 01:48:54 (8328): Powering off VM.
2024-06-15 01:48:55 (8328): Successfully stopped VM.
2024-06-15 01:48:55 (8328): Deregistering VM. (boinc_9e705b373655c0e3, slot#4)
2024-06-15 01:48:55 (8328): Removing network bandwidth throttle group from VM.
2024-06-15 01:48:55 (8328): Removing VM from VirtualBox.
2024-06-15 01:49:00 (8328): called boinc_finish(0)
]]>
LHC@home
LHC@home
Project
Computing
Community
Jobs
Site
Magic Quantum Mechanic
Log out
Name Theory_2773-2944255-52_0
Workunit 223595192
Created 13 Jun 2024, 6:41:53 UTC
Sent 13 Jun 2024, 23:00:33 UTC
Report deadline 24 Jun 2024, 23:00:33 UTC
Received 15 Jun 2024, 8:49:18 UTC
Server state Over
Outcome Success
Client state Done
Exit status 0 (0x00000000)
Computer ID 10451775
Run time 1 days 9 hours 18 min 12 sec
CPU time 1 days 3 hours 29 min 1 sec
Validate state Valid
Credit 1,151.54
Device peak FLOPS 4.15 GFLOPS
Application version Theory Simulation v300.30 (vbox64_theory)
windows_x86_64
Peak working set size 81.87 MB
Peak swap size 103.18 MB
Peak disk usage 2.04 GB
Stderr output
2024-06-13 16:30:49 (8328): vboxwrapper version 26207
2024-06-13 16:30:49 (8328): BOINC client version: 7.24.1
2024-06-13 16:30:50 (8328): Detected: VirtualBox VboxManage Interface (Version: 6.1.50)
2024-06-13 16:30:50 (8328): Detected: Heartbeat check (file: 'heartbeat' every 1200.000000 seconds)
2024-06-13 16:30:50 (8328): Successfully copied 'init_data.xml' to the shared directory.
2024-06-13 16:30:50 (8328): Successfully copied 'input' to the shared directory.
2024-06-13 16:30:50 (8328): Create VM. (boinc_9e705b373655c0e3, slot#4)
2024-06-13 16:30:51 (8328): Setting Memory Size for VM. (630MB)
2024-06-13 16:30:51 (8328): Setting CPU Count for VM. (1)
2024-06-13 16:30:51 (8328): Setting Chipset Options for VM.
2024-06-13 16:30:52 (8328): Setting Graphics Controller Options for VM.
2024-06-13 16:30:52 (8328): Setting Boot Options for VM.
2024-06-13 16:30:52 (8328): Setting Network Configuration for NAT.
2024-06-13 16:30:52 (8328): Enabling VM Network Access.
2024-06-13 16:30:53 (8328): Disabling USB Support for VM.
2024-06-13 16:30:53 (8328): Disabling COM Port Support for VM.
2024-06-13 16:30:53 (8328): Disabling LPT Port Support for VM.
2024-06-13 16:30:53 (8328): Disabling Audio Support for VM.
2024-06-13 16:30:54 (8328): Disabling Clipboard Support for VM.
2024-06-13 16:30:54 (8328): Disabling Drag and Drop Support for VM.
2024-06-13 16:30:54 (8328): Adding storage controller(s) to VM.
2024-06-13 16:30:54 (8328): Adding virtual disk drive to VM. (Theory_2024_04_30_prod.vdi)
2024-06-13 16:30:55 (8328): Adding VirtualBox Guest Additions to VM.
2024-06-13 16:30:55 (8328): Adding network bandwidth throttle group to VM. (Defaulting to 1024GB)
2024-06-13 16:30:55 (8328): forwarding host port 51981 to guest port 80
2024-06-13 16:30:56 (8328): Enabling remote desktop for VM.
2024-06-13 16:30:56 (8328): Enabling shared directory for VM.
2024-06-13 16:30:57 (8328): Starting VM using VBoxManage interface. (boinc_9e705b373655c0e3, slot#4)
2024-06-13 16:31:03 (8328): Successfully started VM. (PID = '1992')
2024-06-13 16:31:03 (8328): Reporting VM Process ID to BOINC.
2024-06-13 16:31:03 (8328): Guest Log: BIOS: VirtualBox 6.1.50
2024-06-13 16:31:03 (8328): Guest Log: CPUID EDX: 0x178bfbff
2024-06-13 16:31:03 (8328): Guest Log: BIOS: No PCI IDE controller, not probing IDE
2024-06-13 16:31:03 (8328): Guest Log: BIOS: AHCI 0-P#0: PCHS=16383/16/63 LCHS=1024/255/63 0x0000000002800000 sectors
2024-06-13 16:31:03 (8328): VM state change detected. (old = 'poweredoff', new = 'running')
2024-06-13 16:31:03 (8328): Detected: Web Application Enabled (http://localhost:51981)
2024-06-13 16:31:03 (8328): Detected: Remote Desktop Enabled (localhost:51982)
2024-06-13 16:31:03 (8328): Preference change detected
2024-06-13 16:31:03 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 16:31:03 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 16:31:05 (8328): Guest Log: BIOS: Boot : bseqnr=1, bootseq=0032
2024-06-13 16:31:05 (8328): Guest Log: BIOS: Booting from Hard Disk...
2024-06-13 16:31:08 (8328): Guest Log: BIOS: KBD: unsupported int 16h function 03
2024-06-13 16:31:08 (8328): Guest Log: BIOS: AX=0305 BX=0000 CX=0000 DX=0000
2024-06-13 16:31:41 (8328): Guest Log: vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
2024-06-13 16:31:41 (8328): Guest Log: vboxguest: misc device minor 56, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
2024-06-13 16:31:44 (8328): Guest Log: VBoxService 5.2.6 r120293 (verbosity: 0) linux.amd64 (Jan 15 2018 14:51:00) release log
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000134 main Log opened 2024-06-13T23:31:45.146476000Z
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000250 main OS Product: Linux
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000308 main OS Release: 4.14.76-13.cernvm.x86_64
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000346 main OS Version: #1 SMP Tue Oct 16 18:26:15 CEST 2018
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000400 main Executable: /usr/sbin/VBoxService
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000402 main Process ID: 3224
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.000403 main Package type: LINUX_64BITS_GENERIC
2024-06-13 16:31:44 (8328): Guest Log: 00:00:00.003897 main 5.2.6 r120293 started. Verbose level = 0
2024-06-13 16:32:25 (8328): Guest Log: 01:32:25 CEST +02:00 2024-06-14: cranky: [INFO] Detected Theory App
2024-06-13 16:32:25 (8328): Guest Log: 01:32:25 CEST +02:00 2024-06-14: cranky: [INFO] Checking CVMFS.
2024-06-13 16:32:26 (8328): Guest Log: Probing /cvmfs/sft.cern.ch... OK
2024-06-13 16:32:27 (8328): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE
2024-06-13 16:32:27 (8328): Guest Log: 2.5.2.0 4107 0 25720 29590 3 1 272105 4096000 0 65024 0 0 n/a 5 0 http://s1cern-cvmfs.openhtc.io/cvmfs/sft.cern.ch DIRECT 1
2024-06-13 16:32:28 (8328): Guest Log: Probing /cvmfs/grid.cern.ch... OK
2024-06-13 16:32:30 (8328): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE
2024-06-13 16:32:30 (8328): Guest Log: 2.5.2.0 4072 0 27432 24463 3 2 272105 4096000 0 65024 0 2 -100 7962 719 http://s1unl-cvmfs.openhtc.io/cvmfs/grid.cern.ch DIRECT 1
2024-06-13 16:32:31 (8328): Guest Log: Probing /cvmfs/cernvm-prod.cern.ch... OK
2024-06-13 16:32:32 (8328): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE
2024-06-13 16:32:32 (8328): Guest Log: 2.5.2.0 4101 0 25180 272 3 1 272105 4096000 0 65024 0 0 n/a 4 0 http://s1ral-cvmfs.openhtc.io/cvmfs/cernvm-prod.cern.ch DIRECT 1
2024-06-13 16:32:33 (8328): Guest Log: Probing /cvmfs/alice.cern.ch... OK
2024-06-13 16:32:35 (8328): Guest Log: VERSION PID UPTIME(M) MEM(K) REVISION EXPIRES(M) NOCATALOGS CACHEUSE(K) CACHEMAX(K) NOFDUSE NOFDMAX NOIOERR NOOPEN HITRATE(%) RX(K) SPEED(K/S) HOST PROXY ONLINE
2024-06-13 16:32:35 (8328): Guest Log: 2.5.2.0 4110 0 37572 18890 3 1 272105 4096000 0 65024 0 0 n/a 5424 709 http://s1fnal-cvmfs.openhtc.io/cvmfs/alice.cern.ch DIRECT 1
2024-06-13 16:32:35 (8328): Guest Log: 01:32:35 CEST +02:00 2024-06-14: cranky: [INFO] Checking runc.
2024-06-13 16:32:35 (8328): Guest Log: 01:32:35 CEST +02:00 2024-06-14: cranky: [INFO] Creating the filesystem.
2024-06-13 16:32:35 (8328): Guest Log: 01:32:35 CEST +02:00 2024-06-14: cranky: [INFO] Using /cvmfs/cernvm-prod.cern.ch/cvm4
2024-06-13 16:32:35 (8328): Guest Log: 01:32:36 CEST +02:00 2024-06-14: cranky: [INFO] Updating config.json.
2024-06-13 16:32:35 (8328): Guest Log: 01:32:36 CEST +02:00 2024-06-14: cranky: [INFO] Running Container 'runc'.
2024-06-13 16:33:23 (8328): Guest Log: job: htmld=/shared/html/job
2024-06-13 16:33:29 (8328): Guest Log: job: unpack exitcode=0
2024-06-13 16:33:32 (8328): Guest Log: INFO: activated the work-around for ld:
2024-06-13 16:33:34 (8328): Guest Log: lrwxrwxrwx 1 0 0 15 Jun 13 23:33 /tmp/tmp.1GoZw6rxZj/ld -> /usr/bin/ld.bfd
2024-06-13 16:33:36 (8328): Guest Log: 01:33:36 CEST +02:00 2024-06-14: cranky: [INFO] ===> [runRivet] Thu Jun 13 23:33:35 UTC 2024 [boinc pp jets 13000 440 - powheg-box r3744 pthard2 100000 52]
2024-06-13 16:38:15 (8328): Preference change detected
2024-06-13 16:38:15 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 16:38:15 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 16:46:29 (8328): Preference change detected
2024-06-13 16:46:29 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 16:46:29 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 17:15:45 (8328): Preference change detected
2024-06-13 17:15:45 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 17:15:45 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 17:44:01 (8328): Preference change detected
2024-06-13 17:44:01 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 17:44:02 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 18:11:08 (8328): Status Report: Job Duration: '864000.000000'
2024-06-13 18:11:08 (8328): Status Report: Elapsed Time: '6000.000000'
2024-06-13 18:11:08 (8328): Status Report: CPU Time: '269.218750'
2024-06-13 18:36:19 (8328): Preference change detected
2024-06-13 18:36:19 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 18:36:19 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 19:51:12 (8328): Status Report: Job Duration: '864000.000000'
2024-06-13 19:51:12 (8328): Status Report: Elapsed Time: '12000.000000'
2024-06-13 19:51:12 (8328): Status Report: CPU Time: '390.312500'
2024-06-13 19:58:19 (8328): Preference change detected
2024-06-13 19:58:19 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 19:58:20 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 19:58:31 (8328): Preference change detected
2024-06-13 19:58:31 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 19:58:32 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 20:07:46 (8328): Preference change detected
2024-06-13 20:07:46 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 20:07:46 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 20:25:02 (8328): Preference change detected
2024-06-13 20:25:02 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 20:25:02 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 21:11:20 (8328): Preference change detected
2024-06-13 21:11:20 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 21:11:20 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 21:31:17 (8328): Status Report: Job Duration: '864000.000000'
2024-06-13 21:31:17 (8328): Status Report: Elapsed Time: '18000.000000'
2024-06-13 21:31:17 (8328): Status Report: CPU Time: '503.312500'
2024-06-13 21:57:38 (8328): Preference change detected
2024-06-13 21:57:38 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 21:57:38 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 23:11:22 (8328): Status Report: Job Duration: '864000.000000'
2024-06-13 23:11:22 (8328): Status Report: Elapsed Time: '24000.000000'
2024-06-13 23:11:22 (8328): Status Report: CPU Time: '3319.968750'
2024-06-13 23:50:22 (8328): Preference change detected
2024-06-13 23:50:22 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 23:50:23 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-13 23:50:34 (8328): Preference change detected
2024-06-13 23:50:34 (8328): Setting CPU throttle for VM. (100%)
2024-06-13 23:50:35 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 00:00:39 (8328): Preference change detected
2024-06-14 00:00:39 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 00:00:39 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 00:12:44 (8328): Preference change detected
2024-06-14 00:12:44 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 00:12:44 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 00:43:50 (8328): Preference change detected
2024-06-14 00:43:50 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 00:43:50 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 00:51:29 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 00:51:29 (8328): Status Report: Elapsed Time: '30000.000000'
2024-06-14 00:51:29 (8328): Status Report: CPU Time: '9324.062500'
2024-06-14 01:04:26 (8328): Preference change detected
2024-06-14 01:04:26 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 01:04:26 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 02:31:34 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 02:31:34 (8328): Status Report: Elapsed Time: '36000.000000'
2024-06-14 02:31:34 (8328): Status Report: CPU Time: '15326.765625'
2024-06-14 04:11:41 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 04:11:41 (8328): Status Report: Elapsed Time: '42000.121483'
2024-06-14 04:11:41 (8328): Status Report: CPU Time: '21332.218750'
2024-06-14 05:51:46 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 05:51:46 (8328): Status Report: Elapsed Time: '48000.121483'
2024-06-14 05:51:46 (8328): Status Report: CPU Time: '27334.906250'
2024-06-14 06:04:34 (8328): Preference change detected
2024-06-14 06:04:34 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 06:04:35 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 07:31:50 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 07:31:50 (8328): Status Report: Elapsed Time: '54000.121483'
2024-06-14 07:31:50 (8328): Status Report: CPU Time: '33337.937500'
2024-06-14 09:11:55 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 09:11:55 (8328): Status Report: Elapsed Time: '60000.121483'
2024-06-14 09:11:55 (8328): Status Report: CPU Time: '39341.406250'
2024-06-14 10:51:59 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 10:51:59 (8328): Status Report: Elapsed Time: '66000.121483'
2024-06-14 10:51:59 (8328): Status Report: CPU Time: '45344.515625'
2024-06-14 11:04:44 (8328): Preference change detected
2024-06-14 11:04:44 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 11:04:44 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 12:32:04 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 12:32:04 (8328): Status Report: Elapsed Time: '72000.121483'
2024-06-14 12:32:04 (8328): Status Report: CPU Time: '51347.265625'
2024-06-14 14:12:08 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 14:12:08 (8328): Status Report: Elapsed Time: '78000.121483'
2024-06-14 14:12:08 (8328): Status Report: CPU Time: '57350.000000'
2024-06-14 15:52:13 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 15:52:13 (8328): Status Report: Elapsed Time: '84000.121483'
2024-06-14 15:52:13 (8328): Status Report: CPU Time: '63353.093750'
2024-06-14 16:04:52 (8328): Preference change detected
2024-06-14 16:04:52 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 16:04:53 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 17:32:17 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 17:32:17 (8328): Status Report: Elapsed Time: '90000.121483'
2024-06-14 17:32:17 (8328): Status Report: CPU Time: '69356.078125'
2024-06-14 19:12:22 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 19:12:22 (8328): Status Report: Elapsed Time: '96000.121483'
2024-06-14 19:12:22 (8328): Status Report: CPU Time: '75359.203125'
2024-06-14 20:52:27 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 20:52:27 (8328): Status Report: Elapsed Time: '102000.121483'
2024-06-14 20:52:27 (8328): Status Report: CPU Time: '81195.531250'
2024-06-14 21:05:02 (8328): Preference change detected
2024-06-14 21:05:02 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 21:05:03 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 21:16:34 (8328): Preference change detected
2024-06-14 21:16:34 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 21:16:34 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 22:30:20 (8328): Preference change detected
2024-06-14 22:30:20 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 22:30:20 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-14 22:32:31 (8328): Status Report: Job Duration: '864000.000000'
2024-06-14 22:32:31 (8328): Status Report: Elapsed Time: '108000.121483'
2024-06-14 22:32:31 (8328): Status Report: CPU Time: '87199.171875'
2024-06-14 23:18:23 (8328): Preference change detected
2024-06-14 23:18:23 (8328): Setting CPU throttle for VM. (100%)
2024-06-14 23:18:23 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-15 00:00:41 (8328): Preference change detected
2024-06-15 00:00:41 (8328): Setting CPU throttle for VM. (100%)
2024-06-15 00:00:41 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-15 00:12:35 (8328): Status Report: Job Duration: '864000.000000'
2024-06-15 00:12:35 (8328): Status Report: Elapsed Time: '114000.121483'
2024-06-15 00:12:35 (8328): Status Report: CPU Time: '93201.796875'
2024-06-15 00:13:23 (8328): Preference change detected
2024-06-15 00:13:23 (8328): Setting CPU throttle for VM. (100%)
2024-06-15 00:13:24 (8328): Setting checkpoint interval to 600 seconds. (Higher value of (Preference: 100 seconds) or (Vbox_job.xml: 600 seconds))
2024-06-15 01:48:49 (8328): Guest Log: job: run exitcode=0
2024-06-15 01:48:49 (8328): Guest Log: job: diskusage=103600
2024-06-15 01:48:49 (8328): Guest Log: job: logsize=104 k
2024-06-15 01:48:49 (8328): Guest Log: job: times=
2024-06-15 01:48:49 (8328): Guest Log: 0m0.050s 0m0.050s
2024-06-15 01:48:49 (8328): Guest Log: 1617m8.836s 10m37.715s
2024-06-15 01:48:49 (8328): Guest Log: job: cpuusage=97667
2024-06-15 01:48:53 (8328): Guest Log: 10:48:50 CEST +02:00 2024-06-15: cranky: [INFO] Container 'runc' finished with status code 0.
2024-06-15 01:48:53 (8328): Guest Log: 10:48:51 CEST +02:00 2024-06-15: cranky: [INFO] Preparing output.
2024-06-15 01:48:54 (8328): Guest Log: [INFO] Job Finished
2024-06-15 01:48:54 (8328): Guest Log: [INFO] Shutting Down.
2024-06-15 01:48:54 (8328): VM Completion File Detected.
2024-06-15 01:48:54 (8328): VM Completion Message: Job Finished
.
2024-06-15 01:48:54 (8328): Powering off VM.
2024-06-15 01:48:55 (8328): Successfully stopped VM.
2024-06-15 01:48:55 (8328): Deregistering VM. (boinc_9e705b373655c0e3, slot#4)
2024-06-15 01:48:55 (8328): Removing network bandwidth throttle group from VM.
2024-06-15 01:48:55 (8328): Removing VM from VirtualBox.
2024-06-15 01:49:00 (8328): called boinc_finish(0)
]]>
Bookie Challenge
Original Rookie of the Year
BC CHAMPION 2018
BC CHAMPION 2019
BC CHAMPION 2024
Many time Rudy Award Winner
Bookie Challenge Hall of Fame
https://tinyurl.com/OfficialBookieChallenge
Re: Quantum Field Theory and Einsteins General Theory
https://www.youtube.com/watch?v=XtMmeAjQTXc&list=PL8_xPU5epJddRABXqJ5h5G0dk-XGtA5cZ
Caltech Professor David Goodstein The Mechanical Universe
![Quantum Field Theory and Einsteins General Theory Powheg10](https://i.servimg.com/u/f80/19/36/49/57/powheg10.jpg)
My fireworks video from 2019 https://www.facebook.com/100001811800844/videos/2807415125995520/
LHC https://home.cern/resources/faqs/facts-and-figures-about-lhc
Caltech Professor David Goodstein The Mechanical Universe
![Quantum Field Theory and Einsteins General Theory Powheg10](https://i.servimg.com/u/f80/19/36/49/57/powheg10.jpg)
My fireworks video from 2019 https://www.facebook.com/100001811800844/videos/2807415125995520/
LHC https://home.cern/resources/faqs/facts-and-figures-about-lhc
Bookie Challenge
Original Rookie of the Year
BC CHAMPION 2018
BC CHAMPION 2019
BC CHAMPION 2024
Many time Rudy Award Winner
Bookie Challenge Hall of Fame
https://tinyurl.com/OfficialBookieChallenge
![-](https://2img.net/i/empty.gif)
» To the Quantum Mechanic...
» Quantum Treasurer? Did you try that FLV to WMV sortware yet
» Wrigley Field
» Still looking to fill the field?
» The Sun's Magnetic Field is about to Flip
» Quantum Treasurer? Did you try that FLV to WMV sortware yet
» Wrigley Field
» Still looking to fill the field?
» The Sun's Magnetic Field is about to Flip
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|